FIRST DEFENCE

A Polymeric Protectant

DDESCRIPTION

A unique polymeric product specifically designed to provide protection from corrosion,

abrasion and water and oil repellency to the treated surface. Once applied, First Defence

 reacts with the surface and forms an actual chemical bond that will withstand extremes of

 moisture and temperature while protecting surfaces from corrosive agents and abrasive

 particulate matter.

First Defence can be applied to cleaned metal surfaces, wood (including pressure

 treated lumber), masonry (marble, limestone or concrete), tile material (Saltillo, clay or stucco)

 or granite, terrazzo or grout.

Hard surface applications and coverage rates will depend on the type of surface. 

First Defence provides excellent repellency on concrete, brick, stucco, pavers and

 tile at an application rate of 1gallon per 200 – 400 square foot of surface.

For application of metal tanker surfaces apply 1 gallon of First Defence per 900 square

foot of surface.

DIRECTIONS:

Thoroughly clean the surface.  Spray, brush or use roller to apply

First Defence to the surface.  Repellency will start to develop almost

immediately. Allow 24 to 72 hours to dry depending on humidity

and temperature.  An actual chemical bond will occur. If spraying

a low volume and low-pressure (60 PSI or lower) pump must be used.

A facemask must be worn if spraying. Please see MSDS for

appropriate Personal Protective Equipment.

CONTAINS

Proprietary polymeric material.